Labwater 2 with Hose and Gun
Max. feed pressure (bar): 0.5 – 5
Max. feed flow rate (l/hr): 60
Output capacity, litres
@ 50 mg/l tds* (soft): 1280
@ 200 mg/l tds* (medium-hard): 320
@ 300 mg/l tds* (hard): 212
Conductivity: 10 – 1µS/cm
*tds = total dissolved solids
Width (mm): 80
Height (mm): 760
Feed water: Potable
Maximum TDS (ppm): 1000
Feed water temperature: 1 – 35oC
A simple, cost-effective method of producing 10-1µS.cm purified water at low volumes.
The Labwater units incorporate an easily replaceable cartridge, containing specifically designed resin, which changes colour through absorption of ionic contaminants, facilitating a low level of maintenance. On colour change from blue to brown, replace the cartridge.
The units are typically wall-mounted and are easily connected via a dedicated hose to a tap or stopcock and operate directly from water pressure thus requiring no external electrical supply.