Peltier-Cooled Incubator, 749L, Model IPP750eco
R 292,758.81
- Chamber type: Peltier-cooled incubator (no compressor, no refrigerant)
- Controller: SingleDISPLAY ControlCOCKPIT
- Setting temperature range: 0°C to +70°C
- Working temperature range: 0°C (min. 20 K below ambient) to +70°C (without light); +10°C to +40°C (with light, Option P1)
- Setting accuracy (temperature): 0.1°C
- Convection: Forced ventilation by Peltier fan
- Internal volume: 749 L
- Internal dimensions (W × H × D): 1 040 × 1 200 × 600 mm (usable depth less 32 mm for Peltier fan)
- External dimensions (W × H × D): 1 224 × 1 720 × 755 mm (depth +56 mm door handle; +111 mm Peltier element)
- Net weight: Approx. 208 kg
- Electrical supply: 230 V or 115 V, 50/60 Hz; approx. 1 300 W
- Installation: Lockable castors
- Calibration document: Works calibration certificate included (+10°C, +25°C, +40°C)
- Certifications: CE, EAC, VDE, cULus
Need a customised solution?
Optional accessories are available for purchase separately. If your order needs a customised configuration, our technical specialists will follow up with full details before your order is finalised. Contact us via the enquiry form or sales@lasec.com.
Installation, training and special delivery
Some products require installation, training, or special delivery (such as tail-lift trucks, extra labour, or hazardous material packaging). If your order needs this, we'll contact you with the additional cost before dispatch, so your final invoice may differ from the listed price.
Ordering from outside South Africa
Online ordering is currently limited to South African customers, but our full range is still available. Log an enquiry or email international@lasec.com and our international sales team will assist you through our traditional sales channels.
DISCLAIMER: All product images are for illustrative purposes only. Actual products may vary slightly in colours, controls, and visible features.
Availability:On Request
SKU
IMEMIPP750ECO
BrandMemmert
Product Overview
Memmert Peltier-Cooled Incubator, IPPeco Series
Refrigerant-free cooled incubation from 0 °C to +70 °C, across nine chamber sizes from 32 to 2 140 litres
The Memmert IPPeco is a range of Peltier-cooled incubators for microbiological and food science applications requiring precise temperature control both above and below room temperature. Operating without a compressor or refrigerant, the series covers a temperature range of 0 °C to +70 °C across nine chamber sizes from 32 to 2 140 litres.
Advanced Peltier Technology integrates fans directly into the Peltier elements, enabling rapid energy transfer and tight temperature homogeneity across the working chamber. The interior is sealed from the surroundings; condensation during cooling occurs on the Peltier element outside the working chamber rather than inside, reducing the risk of sample drying and protecting cultures from condensate exposure. The absence of a compressor means the IPPeco operates with low vibration and lower noise than equivalent refrigerant-cooled incubators, making it well suited to vibration-sensitive biological samples.
Each size is available as a base model with SingleDISPLAY ControlCOCKPIT, or as a "plus" variant with TwinDISPLAY, which supports temperature ramp programming and documentation via AtmoCONTROL software.
- Temperature range: 0–+70 °C
- Available volumes: 32–2 140 L
- 9 sizes: 18 model variants
- No compressor: Advanced Peltier Technology
Key Features
- Advanced Peltier Technology: Peltier-based heating and cooling with no compressor and no refrigerant. Fans integrated into the Peltier elements support rapid energy transfer and optimum temperature distribution throughout the chamber.
- Condensation-free working chamber: The interior is sealed from the surroundings. Condensation during cooling forms on the Peltier element outside the chamber, protecting samples from condensate and minimising drying risk.
- Double doors, standard: Fully insulated stainless steel outer door and wide-area interior glass door on all models. Limits contamination and temperature fluctuation during access while allowing visual inspection of the chamber load.
- Low vibration and low noise: The compressor-free design delivers lower vibration and quieter operation than refrigerant-cooled alternatives, an advantage for vibration-sensitive biological samples and shared laboratory environments.
- SingleDISPLAY and TwinDISPLAY variants: Base models use SingleDISPLAY ControlCOCKPIT for straightforward operation. TwinDISPLAY ("plus") models add temperature ramp programming and full documentation via AtmoCONTROL software with integrated data logger.
- Stainless steel construction: High-quality, corrosion-resistant stainless steel used almost exclusively for the working chamber and housing, supporting easy cleaning and long service life.
- Precise temperature homogeneity: Fine Peltier control with minimal fluctuations across the full 0 °C to +70 °C working range ensures consistent conditions throughout the chamber, even when fully loaded.
- Space-efficient footprint: The compressor-free design reduces the overall unit footprint compared to refrigerant-cooled incubators of equivalent capacity, freeing bench and floor space in the laboratory.
Applications
- Microbiological analyses
- Bacterial count determination
- Cultivation above and below room temperature
- Beer stability accelerated ageing tests
- Shelf-life testing of dairy products
- Food science research and quality assurance
Available Models
| Model (SingleDISPLAY / TwinDISPLAY) | Volume (L) | Internal W × H × D (mm) |
|---|---|---|
| IPP30 / IPP30plus | 32 | 400 × 320 × 250 |
| IPP55 / IPP55plus | 53 | 400 × 400 × 330 |
| IPP110eco / IPP110ecoplus | 108 | 560 × 480 × 400 |
| IPP260eco / IPP260ecoplus | 256 | 640 × 800 × 500 |
| IPP410eco / IPP410ecoplus | 384 | 640 × 1 200 × 500 |
| IPP750eco / IPP750ecoplus | 749 | 1 040 × 1 200 × 600 |
| IPP1060eco / IPP1060ecoplus | 1 060 | 1 040 × 1 200 × 850 |
| IPP1400eco / IPP1400ecoplus | 1 360 | 1 250 × 1 450 × 750 |
| IPP2200eco / IPP2200ecoplus | 2 140 | 1 972 × 1 450 × 750 |
The ACT® registered trademark is owned and controlled by My Green Lab Inc. More details at https://act.mygreenlab.org.
| Temperature | |
|---|---|
| Setting temperature range | 0 to +70 °C |
| Working temperature range | with light: +10 to +40 °C |
| Working temperature range | without light: from 0 (at least 20 below ambient temperature) to +70°C |
| Setting accuracy temperature | 0.1 °C |
| Temperature sensor | 1 Pt100 sensor DIN class A in 4-wire-circuit |
| Control technology | |
| Language setting | German, English, Spanish, French, Polish, Czech, Hungarian, Italian, Chinese |
| ControlCOCKPIT | SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display |
| Timer | Digital backwards counter with target time setting, adjustable from 1 minute to 99 days |
| Function SetpointWAIT | the process time does not start until the set temperature is reached |
| Calibration | three freely selectable temperature values |
| adjustable parameters | temperature (Celsius or Fahrenheit), programme time, time zones, summertime/wintertime |
| Ventilation | |
| Convection | forced ventilation by Peltier fan |
| Communication | |
| Documentation | programme stored in case of power failure |
| Programming | AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand). |
| Safety | |
| Temperature control | adjustable electronic overtemperature monitor and mechanical temperature limiter |
| Autodiagnostic system | for fault analysis |
| Heating concept | |
| Peltier | energy-saving Peltier heating-/cooling system integrated in the rear (heat pump principle) |
| Standard equipment | |
| Works calibration certificate | for +10 °C, +25 °C and +40 °C |
| Door | inner glass doors |
| Door | fully insulated stainless steel doors with 2-point locking (compression door lock) |
| Internals | 2 stainless steel grid(s), electropolished |
| Stainless steel interior | |
| Dimensions | W(A) x H(B) x D(C): 1040 x 1200 x 600 mm (d less 32 mm for fan - Peltier) |
| Volume | 749 l |
| Max. number of internals | 14 |
| Max. loading of chamber | 200 kg |
| Max. loading per internal | 30 kg |
| Textured stainless steel casing | |
| Dimensions | W(D) x H(E) x D(F): 1224 x 1720 x 755 mm (d +56mm door handle & +111mm Peltier element) |
| Installation | on lockable castors |
| Housing | rear zinc-plated steel |
| Electrical data | |
| Voltage Electrical load | 230 V, 50/60 Hz approx. 1300 W |
| Voltage Electrical load | 115 V, 50/60 Hz approx. 1300 W |
| Ambient conditions | |
| Set Up | The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm. |
| Ambient temperature | 16 °C to 40 °C |
| Humidity rh | max. 70 %, non-condensing |
| Altitude of installation | max. 2,000 m above sea level |
| Overvoltage category | II |
| Pollution degree | 2 |
| Packing/shipping data | |
| Transport information | The appliances must be transported upright |
| Customs tariff number | 8419 8998 |
| WEEE-Reg.-No. | DE 66812464 |
| Dimensions approx incl. carton | w x h x d: 1330 x 1910 x 1050 mm |
| Net weight | approx. 208 kg |
| Gross weight carton | approx. 274 kg |
Frequently Asked Questions about the Peltier-Cooled Incubator, 749L, Model IPP750eco
Q: What is the temperature range of the Memmert IPP750eco?
A: The Memmert IPP750eco has a setting temperature range of 0°C to +70°C. Without the optional light module, its working range extends from 0°C to +70°C, with the lowest achievable temperature requiring a minimum difference of 20 K below ambient temperature.
Q: What is the internal capacity of the IPP750eco?
A: The IPP750eco has an internal chamber volume of 749 litres. Its stainless-steel interior measures 1 040 × 1 200 × 600 mm (W × H × D), with usable depth reduced by 32 mm for the Peltier fan.
Q: How does the IPP750eco heat and cool?
A: The IPP750eco uses Advanced Peltier Technology for both heating and cooling. The energy-saving Peltier system is integrated into the rear of the incubator and operates according to the heat-pump principle.
Q: Does the IPP750eco use a compressor or refrigerant?
A: No. The IPP750eco is a compressor-free and refrigerant-free cooled incubator, using Peltier technology instead of a conventional refrigeration system.
Q: What controller does the IPP750eco use?
A: The IPP750eco uses the SingleDISPLAY ControlCOCKPIT, an adaptive multifunctional digital PID microprocessor controller with a high-definition TFT colour display.
Q: What is the temperature setting accuracy of the IPP750eco?
A: The IPP750eco has a temperature setting accuracy of 0.1°C. Temperature measurement is provided by one Pt100 DIN Class A sensor in a 4-wire circuit.
Q: How is air circulated inside the IPP750eco?
A: The incubator uses forced ventilation by a Peltier fan. Fans integrated into the Peltier elements support rapid energy transfer and consistent temperature distribution throughout the working chamber.
Q: How does the IPP750eco manage condensation during cooling?
A: The working chamber is sealed from the surroundings so that condensation during cooling forms on the Peltier element outside the working chamber. This helps protect samples from condensate exposure and minimises the risk of sample drying.
Q: What applications is the IPP750eco suitable for?
A: Typical applications include microbiological analyses, bacterial count determination, cultivation above and below room temperature, beer stability accelerated ageing tests, shelf-life testing of dairy products, and food science research and quality assurance.
Q: Is the IPP750eco suitable for vibration-sensitive samples?
A: Yes. Its compressor-free Peltier design provides low-vibration and lower-noise operation compared with conventional refrigerant-cooled incubators, making it suitable for vibration-sensitive biological samples.
Q: Can the IPP750eco be used with an illumination module?
A: Yes. The optional P1 light module can be used with the IPP750eco. When operating with illumination, the specified working temperature range is +10°C to +40°C.
Q: What is the difference between the IPP750eco and IPP750ecoplus?
A: The IPP750eco is the base model with SingleDISPLAY ControlCOCKPIT. The IPP750ecoplus is the TwinDISPLAY “plus” variant, which adds temperature ramp programming and expanded documentation capabilities through AtmoCONTROL software with an integrated data logger.
Q: Does the IPP750eco support AtmoCONTROL software?
A: Yes. AtmoCONTROL software can be used for reading, managing and organising data logger information via the Ethernet interface. A temporary trial version can be downloaded, while a USB stick containing AtmoCONTROL is available as an accessory on demand.
Q: What timer functions are available on the IPP750eco?
A: The controller includes a digital backwards counter with a target time adjustable from 1 minute to 99 days. The SetpointWAIT function prevents process time from starting until the selected temperature has been reached.
Q: Can the IPP750eco be calibrated at different temperatures?
A: Yes. The controller supports calibration at three freely selectable temperature values. A works calibration certificate covering +10°C, +25°C and +40°C is included as standard.
Q: What safety features are included with the IPP750eco?
A: The IPP750eco includes an adjustable electronic overtemperature monitor, a mechanical temperature limiter, and an autodiagnostic system for fault analysis.
Q: What type of doors does the IPP750eco have?
A: The incubator features fully insulated stainless-steel outer doors with two-point compression locking and inner glass doors, allowing visual inspection while helping limit disturbance to the chamber environment.
Q: How many shelves are supplied with the IPP750eco?
A: The IPP750eco is supplied with two electropolished stainless-steel grids. The chamber can accommodate a maximum of 14 internals.
Q: What is the maximum loading capacity of the IPP750eco?
A: The chamber has a maximum total loading capacity of 200 kg. Each internal shelf or grid can support a maximum load of 30 kg.
Q: What are the external dimensions of the IPP750eco?
A: The IPP750eco measures 1 224 × 1 720 × 755 mm (W × H × D). Installation planning should also allow an additional 56 mm depth for the door handle and 111 mm for the rear Peltier element.
Q: How much does the Memmert IPP750eco weigh?
A: The IPP750eco has a net weight of approximately 208 kg. Its gross shipping weight, including the carton, is approximately 274 kg.
Q: How is the IPP750eco installed?
A: The IPP750eco is installed on lockable castors, allowing the incubator to be positioned and then secured at its operating location.
Q: What electrical supply does the IPP750eco require?
A: The incubator is available for 230 V or 115 V, 50/60 Hz electrical supplies. Its approximate electrical load is 1 300 W.
Q: What installation clearances are required around the IPP750eco?
A: Memmert specifies at least 15 cm clearance behind the incubator, 20 cm above it, and 5 cm at the sides from walls or neighbouring equipment.
Q: What ambient conditions are suitable for the IPP750eco?
A: The specified ambient temperature range is 16°C to 40°C, with maximum relative humidity of 70%, non-condensing. The maximum installation altitude is 2 000 m above sea level. The unit is specified for overvoltage category II and pollution degree 2.
Q: How should the IPP750eco be transported?
A: The IPP750eco must be transported upright. Its approximate packaged dimensions are 1 330 × 1 910 × 1 050 mm, with a gross packaged weight of approximately 274 kg.
Q: What certifications does the Memmert IPP750eco have?
A: The IPP750eco carries CE, EAC, VDE and cULus certifications.
Q: Does the Memmert IPP750eco have an ACT Ecolabel?
A: Yes. The IPP750eco is identified with the ACT Ecolabel and is listed in the My Green Lab ACT database.
| Model | IPP750eco |
|---|---|
| Brand | Memmert |
Write Your Own Review
Related Products By Brand
Enquire
Enquire
Enquire