Price to Clear

Handheld Homogenizer D1000

Homogenize most samples in under 30 seconds

For volumes from 100μl to 250ml

Supplied with both 5 mm. and 7 mm. diameter generator probes

Speed range: 8,500 to 30,000 rpm

Capacity: 0.1ml to 250ml

Noise level: < 70db

Operating temperature range: + 4°C to + 65°C

Dimensions (without probe): 45 x 58 x 225 mm.

Electrical: 230V, 50 Hz

In stock
Only 1 left
Add to Enquiry

Benchmark's hand-held homogenizer, the D1000-E Handheld Homogenizer, is designed to rapidly homogenize, emulsify, suspend and disrupt biological samples. Ideal for use with microtubes, the homogenizer works well with samples from 0.1 ml to 250 ml (depending upon the generator probe used).


The D-1000-E is a rotor-stator homogenizer and works by drawing the sample, in liquid, into the generator probe with the variable speed rotor, and then forcing it out through the slots in the stator. This achieves mechanical shearing of the sample. As the sample is repeatedly drawn up and forced through the stator, additional shearing takes place. Most samples are completely homogenized in 30 seconds are less. A powerful, 130W motor drives the rotor at speeds from 8,500 to 30,000 rpm. Speed is adjustable in six steps to meet sample processing needs. A separate on/off switch allows the homogenizer to be left at the appropriate setting.


Generator probes are available in four sizes for the D 1000 E. The 5mm and 7mm diameter has a 50mm length for use with samples in microtubes. The unit is supplied with one each of the 5mm and 7mm generator probes. All the generator probes are made of stainless steel and can be sterilized by autoclaving. This model uses a 230 V EU plug for its power source.

Write Your Own Review
You're reviewing:Handheld Homogenizer D1000
Your Rating

No Related Posts